Ready Seal® is a professional-grade, oil-based, semitransparent stain and sealer in one. It is designed with a unique blend of oil, quality resins and finely ground pigments that penetrate deep to protect and preserve your outdoor wood from the elements. Not only does it protect, but this stain also enhances the natural beauty of wood by reacting to its natural characteristics and allowing the texture and grain of the wood to remain visible. This stain is great for all types of exterior wood including premium-grade lumbers such as Western Red Cedar, Douglas Fir, Cypress, Spruce and Redwoods.
Other Features:
- Goof-Proof™ Design – Requires no back-brushing because it will never leave runs, laps or streaks
- Requires no primer
- May be sprayed, rolled or brushed onto wood surfaces
- Requires no diluting or thinning prior to spray applications
- Requires no wet-line application, the product will blend itself
- Requires no specific temperature range for proper application
- Ready Seal® contains no linseed or vegetable oils that promote algae and fungus growth in wood
- Ready Seal® will never crack, chip, flake or peel
Application: Start by cleaning your wood surface of mildew, dust, dirt, oil and grease. All previous stains and sealers must be completely removed as well and caustic strippers must be neutralized thoroughly. Rinse thoroughly with water.
Before staining, wood must dry completely for 48 hours or more depending on weather conditions. Protect against overspray and cover all plants and vegetation with plastic drop cloth before applying Ready Seal®. Take special precautions when working around porous stone and concrete surfaces, Ready Seal® is a penetrating stain, and will do so on any porous surface.
Pressure washing must be done with special care, so that no damage to the wood surface occurs. If applying Ready Seal® stain and seal to new wood, no sanding is required. If sanding is desired, be sure to clean the surface of all dust prior to staining.
For the best result, Ready Seal® recommends a minimum of 12% moisture or less in all wood species and projects to be stained. Moisture content can be measured using an electronic moisture meter.
Style Number: 367-944
