Product Description
This Plug-In Tamper-Resistant Carbon Monoxide Alarm from Kidde plugs directly into a standard wall outlet which makes installation fast and easy. It utilizes an electrochemical sensor to detect for threats of hazardous carbon monoxide. Since carbon monoxide can’t be seen, smelled or tasted in the air, it is a leading cause of accidental poisoning deaths in America. This CO detector features a 2 AA battery backup for reliable operation even in the event of power outages. It also features a tamper-resist option that can be activated which causes the unit to alert if it has been unplugged or come loose from an outlet. Get peace of mind and protection in your home with this carbon monoxide alarm from Kidde.
Other Features:
Two LEDs – Red illuminates in alarm mode while green illuminates when the AC power is present and the unit is operating normally
Reset/Test Button – Tests the CO alarm circuit operation and offers immediate silencing of the alarm
End-of-Life Alarm – Alerts users to replace CO alarm after 10-years of operation
Low Battery Hush – Silences low battery chip warning for up to 12 hours
Event Memory – If the unit has detected CO concentrations of 100ppm or greater, the green LED will flash every 10 seconds
Battery Pull Tab – Eliminates battery installation time
Style Number: 21025759
Specifications
Power Source: 120VAC, 60HZ, 60mA max 2-AV battery back-up
Sensor: Electrochemical
Audio Alarm: 85dB at 10ft.
Temperature Range: 40?F (4.4?C) to 100?F (37.8?C)
Humidity Range: 10%-95% relative humidity (RH)
Size: 2.75" x 4.5" x 1.5"
Weight: 0.5 lbs.
Interconnects: No
Manuals
Misplace the instructions? No problem! Hartville Hardware is here to help. Below is the instruction manual for the Kidde KN-COB-DP2 Carbon Monoxide Alarm. Read it before you buy it, or come back and download it if you have questions.
Kidde KN-COB-DP2 Carbon Monoxide Alarm Instruction Manual
Warranty & Certifications
No Manuals available for this product