Product Description
EcoPoxy 750mL FlowCast SPR Kit is the ideal casting epoxy for small projects and is formulated for easy pours and fast cures. This two-component epoxy cures water clear and has an excellent air release. Projects demold in one day when the epoxy is used at one-inch thickness, the maximum volume, and under the recommended conditions. Create a clear finish using the epoxy by itself or add liquid or metallic pigments to create custom colors and effects. It also has a low odor and can be used with common woodworking tools. This kit comes with a 500mL resin and a 250mL hardener.
Model Number: EPSPK10-750ML
Specifications
- Mix Ratio by VOLUME (A:B): 2:1
- Mix Ratio by MASS (A:B): 2.5:1
- Recommended Casting Thickness: 1/4” to 1” (6-25mm)
- 1” (25mm) Casting Depth
- Working Time Limit: 4 - 5 hours
- Tacky to Touch Period: Not applicable*
- Set to Touch: 24 hours
- Demolding Time: 24 hours
- Time to Finishing: Immediately after Demolding
- Full Cure: 3 days
- 1/2” (13mm) Casting Depth
- Working Time Limit: 6 - 7 hours
- Tacky to Touch Period: 20 - 32 hours
- Set to Touch: 32 hours
- Demolding Time: 40 - 48 hours
- Time to Finishing: Immediately after Demolding
- Full Cure: 7 days
- Recommended Storage Temperature: 15-25°C (59-77°F)
- Shelf Life: 2 years; unopened
- Viscosity (Thickness): Initial Mixed Viscosity at 22ºC (72ºF) is 410 cP
- Cured Appearance: Cures Water Clear
- Pigmentable: Yes
- Clean Up: Denatured/Isopropyl Alcohol or Warm Soapy Water
Manuals
No Manuals available for this product
Warranty & Certifications
No Manuals available for this product
